威联通的453Bmini无法更新固件,该怎么办啊?求高手指点。
按照官网介绍的手动更新固件,结果报错:“/sbin/tune2fs: Read-only file system while trying to open /dev/sde6
Couldn't find valid filesystem superblock.
/dev/sde2 contains a ext2 file system labelled 'QTS_BOOT_PART2'
created on Wed Oct 12 07:17:29 2022
/dev/sde2: Read-only file system while setting up superblock
mount: block device /dev/sde2 is write-protected, mounting read-only
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/bzImage': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/bzImage.cksum': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/bzImage.sig': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/bzImage.sign': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/initrd.boot': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/initrd.boot.cksum': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/initrd.boot.sig': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/initrd.boot.sign': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/rootfs2.bz': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/rootfs2.bz.cksum': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/rootfs2.bz.sign': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/rootfs_ext.tgz': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/rootfs_ext.tgz.cksum': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/rootfs_ext.tgz.sign': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/qpkg.tar': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/qpkg.tar.cksum': Read-only file system
/bin/cp: cannot create regular file `/root/FLASH_RFS1/boot/qpkg.tar.sign': Read-only file system
Checking bzImage ... Failed.
System update failed. Error code: FW999
nas长时间开启后需要先重启在更新 gaoyi124 发表于 2024-4-11 20:23
nas长时间开启后需要先重启在更新
重启过了 坠落的天使 发表于 2024-4-11 20:37
重启过了
自动更新不能用吗?我记得手动下载的需要解压一下再刷 U盘坏了? fenglin94 发表于 2024-4-11 21:41
U盘坏了?
应该是指的DOM盘吧? gaoyi124 发表于 2024-4-11 20:42
自动更新不能用吗?我记得手动下载的需要解压一下再刷
按照教程一步步来做的,解压也解压了 你为啥不直接开工单找技术呢?
看上去是权限问题,但基本上都是自动更新,还没遇到手动更新的,不行重新下固件再试试。 先恢复一下dom吧
页:
[1]