关于刚刚楼上回复的问题，可以参考intel 在论坛的回复，刚帮你在腾达官网看了下，这个交换机标注的貌似仅支持100/1000/2.5三个速率，如果确实如此，那很可能因为该原因导致WOL失效，我曾今因为这个原因换了交换机，以下是链接：
https://community.intel.com/t5/Ethernet-Products/WOL-issue-with-I225-V-3/m-p/1391787
As per further checking with our engineers, we regret to inform you that there is no existing plan to include the said request on our future updates of driver or firmware.
Regarding the "RCR 1308305858" this is a change request number on which we started to implement default link setting to 10Mbps during system boot and S3, S4, S5 to accommodate to Energy Star requirement.
We have received an update and was advised by our engineers that the behavior that you are experiencing is by designed/expected for the I225.
When the system enters S3, S4, S5, the LAN device must downshift the link speed to the speed which consumes minimal power (i.e., 10Mbps) according to Energy Star requirement.
In I225 NVM 1.73 and later version (i.e., 1.82), we implemented RCR 1308305858 that LAN device can only link at 10Mbps in S3, S4, S5. |
楼主: gLaiVe
310112100042806
发表于 2024-2-8 13:55
