记录下：ER-X路由器开启IPV6功能

Leonmx

一顿乱操作，终于成功打开IPV6,共享下，我是上海电信

configure
set interfaces ethernet eth0 pppoe 0 ipv6 enable
set interfaces ethernet eth0 pppoe 0 ipv6 address autoconf
set interfaces ethernet eth0 pppoe 0 dhcpv6-pd rapid-commit enable
set interfaces switch switch0 ipv6 address autoconf
set interfaces ethernet eth0 pppoe 0 dhcpv6-pd pd 1 prefix-length /56
set interfaces ethernet eth0 pppoe 0 dhcpv6-pd pd 1 interface switch0 prefix-id 1
set interfaces ethernet eth0 pppoe 0 dhcpv6-pd pd 1 interface switch0 service slaac
commit;
save;
exit
reboot