设为首页收藏本站

 找回密码
 加入我们
搜索
      
Chiphell - 分享与交流用户体验»社区 › 讨论区-生活与技术的讨论 › 电脑讨论(新) › 求助Linux大神：Z690主板通过 ASM1064 扩展出的 SATA 口 ...

求助Linux大神：Z690主板通过 ASM1064 扩展出的 SATA 口在 Ubuntu 下不工作

查看数: 4594 | 评论数: 13 | 收藏 0
关灯 | 提示：支持键盘翻页<-左 右->
帖子模式
    组图打开中，请稍候......
itd
发布时间: 2024-6-2 11:05

正文摘要:

本帖最后由 itd 于 2024-6-2 11:26 编辑 WIN11 和 Ubuntu 22.04 双系统 主板是 映泰Z690GTA，带8个SATA口，其中4个是原生，另外4个是通过ASM1064扩展出来的。 八口插满盘，BIOS 和 Win11 都能正常识别，但 Ubuntu ...

回复

wxlg1117 发表于 2024-6-20 11:05
itd 发表于 2024-6-2 22:23
ls 没有列出扩展sata口上的盘，dmesg 输出的信息太多了，我清空之后重启了电脑，
把跟硬盘相关的部分拷出 ...

[    1.254885] ata8: SATA link down (SStatus 4 SControl 300)
[    1.254927] ata6: SATA link down (SStatus 4 SControl 300)
[    1.254969] ata7: SATA link down (SStatus 4 SControl 300)
[    1.255008] ata5: SATA link down (SStatus 4 SControl 300)

这里似乎都down了?
enben 发表于 2024-6-20 10:53
搜下，有说驱动加载错了。
tasagapro 发表于 2024-6-20 09:34
0620.jpg

楼主没有识别出物理接口，可能是扩展卡坏了，或者是OS兼容性问题。。换24.04试试？
chopin1998 发表于 2024-6-20 09:18
lsblk 看一下
litel 发表于 2024-6-3 08:41
主板BIOS升级最新呢
itd 发表于 2024-6-3 08:25
litel 发表于 2024-6-3 06:55
内核更新到最新呢。。。
或者试试Ubuntu24？

刚更新到了Ubuntu24，仍然没起作用。内核的话晚点我再看看。
itd 发表于 2024-6-3 08:24
seekong 发表于 2024-6-3 01:31
lsblk试试看 输出什么信息

这个命令昨天试过了，显示不出来扩展sata上面的盘
litel 发表于 2024-6-3 06:55
内核更新到最新呢。。。
或者试试Ubuntu24？
seekong 发表于 2024-6-3 01:31
lsblk试试看 输出什么信息
itd 发表于 2024-6-2 22:23
9283684 发表于 2024-6-2 19:48
你这是已经驱动了，用的 ahci 驱动。用 ls -l /dev/disk/by-id (这个会显示硬盘序列号) 或者 ls -l /dev/di ...

ls 没有列出扩展sata口上的盘，dmesg 输出的信息太多了，我清空之后重启了电脑，
把跟硬盘相关的部分拷出来贴在下面了，可以看到原生sata口的四个盘都列出来了，
扩展口似乎也识别了，但没列出详细的硬盘信息，这部分也没有那种红字报错。
麻烦大佬有时间的话帮忙喽一眼，我也找一下其中的可疑信息到网上搜搜看。


  1. [    0.897368] intel-lpss 0000:00:15.0: enabling device (0004 -> 0006)
  2. [    0.897640] idma64 idma64.0: Found Intel integrated DMA 64-bit
  3. [    0.899539] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf0 impl SATA mode
  4. [    0.899541] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds
  5. [    0.905619] nvme nvme0: bad crto:0 cap:8202020ff0103ff
  6. [    0.906507] r8169 0000:06:00.0 eth0: RTL8125B, f4:b5:20:45:9f:b9, XID 641, IRQ 133
  7. [    0.906510] r8169 0000:06:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
  8. [    0.910166] nvme nvme2: Shutdown timeout set to 10 seconds
  9. [    0.915505] intel-lpss 0000:00:15.1: enabling device (0004 -> 0006)
  10. [    0.915581] nvme nvme2: 24/0/0 default/read/poll queues
  11. [    0.915848] idma64 idma64.1: Found Intel integrated DMA 64-bit
  12. [    0.919565]  nvme2n1: p1 p2 p3 p4
  13. [    0.921716] nvme nvme0: allocated 40 MiB host memory buffer.
  14. [    0.931889] nvme nvme1: allocated 64 MiB host memory buffer.
  15. [    0.941117] scsi host0: ahci
  16. [    0.941240] scsi host1: ahci
  17. [    0.941316] scsi host2: ahci
  18. [    0.941381] scsi host3: ahci
  19. [    0.941522] scsi host4: ahci
  20. [    0.941645] scsi host5: ahci
  21. [    0.941751] scsi host6: ahci
  22. [    0.941837] scsi host7: ahci
  23. [    0.941880] ata1: DUMMY
  24. [    0.941881] ata2: DUMMY
  25. [    0.941882] ata3: DUMMY
  26. [    0.941883] ata4: DUMMY
  27. [    0.941890] ata5: SATA max UDMA/133 abar m2048@0x3b702000 port 0x3b702300 irq 129
  28. [    0.941895] ata6: SATA max UDMA/133 abar m2048@0x3b702000 port 0x3b702380 irq 129
  29. [    0.941899] ata7: SATA max UDMA/133 abar m2048@0x3b702000 port 0x3b702400 irq 129
  30. [    0.941904] ata8: SATA max UDMA/133 abar m2048@0x3b702000 port 0x3b702480 irq 129
  31. [    0.942152] ahci 0000:05:00.0: SSS flag set, parallel bus scan disabled
  32. [    0.952261] ahci 0000:05:00.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
  33. [    0.952266] ahci 0000:05:00.0: flags: 64bit ncq sntf stag pm led only pio sxs deso sadm sds apst
  34. [    0.952917] scsi host8: ahci
  35. [    0.953059] scsi host9: ahci
  36. [    0.953206] scsi host10: ahci
  37. [    0.953375] scsi host11: ahci
  38. [    0.953448] ata9: SATA max UDMA/133 abar m8192@0x3b380000 port 0x3b380100 irq 174
  39. [    0.953451] ata10: SATA max UDMA/133 abar m8192@0x3b380000 port 0x3b380180 irq 174
  40. [    0.953454] ata11: SATA max UDMA/133 abar m8192@0x3b380000 port 0x3b380200 irq 174
  41. [    0.953457] ata12: SATA max UDMA/133 abar m8192@0x3b380000 port 0x3b380280 irq 174
  42. [    0.964732] nvme nvme0: 16/0/0 default/read/poll queues
  43. [    0.971069] nvme nvme1: 16/0/0 default/read/poll queues
  44. [    0.975682]  nvme1n1: p1 p2
  45. [    0.995293] nvme nvme0: Ignoring bogus Namespace Identifiers
  46. [    1.008518]  nvme0n1: p1
  47. [    1.148556] usb 1-3: new high-speed USB device number 2 using xhci_hcd
  48. [    1.254885] ata8: SATA link down (SStatus 4 SControl 300)
  49. [    1.254927] ata6: SATA link down (SStatus 4 SControl 300)
  50. [    1.254969] ata7: SATA link down (SStatus 4 SControl 300)
  51. [    1.255008] ata5: SATA link down (SStatus 4 SControl 300)
  52. [    1.266905] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  53. [    1.267077] ata9.00: ATA-9: V&G SSD, Q0810B, max UDMA/133
  54. [    1.267130] ata9.00: 4000797360 sectors, multi 1: LBA48 NCQ (depth 32), AA
  55. [    1.267594] ata9.00: Features: Dev-Sleep
  56. [    1.268277] ata9.00: configured for UDMA/133
  57. [    1.268513] scsi 8:0:0:0: Direct-Access     ATA      V&G SSD          0B   PQ: 0 ANSI: 5
  58. [    1.269135] sd 8:0:0:0: Attached scsi generic sg0 type 0
  59. [    1.269275] sd 8:0:0:0: [sda] 4000797360 512-byte logical blocks: (2.05 TB/1.86 TiB)
  60. [    1.269325] sd 8:0:0:0: [sda] Write Protect is off
  61. [    1.269333] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
  62. [    1.269374] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  63. [    1.269428] sd 8:0:0:0: [sda] Preferred minimum I/O size 512 bytes
  64. [    1.271151]  sda: sda1 sda2
  65. [    1.271359] sd 8:0:0:0: [sda] Attached SCSI disk
  66. [    1.299990] usb 1-3: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=87.34
  67. [    1.299995] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  68. [    1.299998] usb 1-3: Product: USB2.1 Hub
  69. [    1.300001] usb 1-3: Manufacturer: GenesysLogic
  70. [    1.301206] hub 1-3:1.0: USB hub found
  71. [    1.301532] hub 1-3:1.0: 4 ports detected
  72. [    1.424696] usb 2-3: new SuperSpeed Plus Gen 2x1 USB device number 2 using xhci_hcd
  73. [    1.447842] usb 2-3: New USB device found, idVendor=05e3, idProduct=0625, bcdDevice=87.34
  74. [    1.447846] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  75. [    1.447848] usb 2-3: Product: USB3.2 Hub
  76. [    1.447850] usb 2-3: Manufacturer: GenesysLogic
  77. [    1.449035] hub 2-3:1.0: USB hub found
  78. [    1.449488] hub 2-3:1.0: 4 ports detected
  79. [    1.572552] usb 1-6: new low-speed USB device number 3 using xhci_hcd
  80. [    1.582885] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  81. [    1.583025] ata10.00: ATA-9: V&G SSD, Q0810B, max UDMA/133
  82. [    1.583078] ata10.00: 4000797360 sectors, multi 1: LBA48 NCQ (depth 32), AA
  83. [    1.583525] ata10.00: Features: Dev-Sleep
  84. [    1.584182] ata10.00: configured for UDMA/133
  85. [    1.584317] scsi 9:0:0:0: Direct-Access     ATA      V&G SSD          0B   PQ: 0 ANSI: 5
  86. [    1.584722] sd 9:0:0:0: Attached scsi generic sg1 type 0
  87. [    1.584831] sd 9:0:0:0: [sdb] 4000797360 512-byte logical blocks: (2.05 TB/1.86 TiB)
  88. [    1.584852] sd 9:0:0:0: [sdb] Write Protect is off
  89. [    1.584857] sd 9:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  90. [    1.584887] sd 9:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  91. [    1.584929] sd 9:0:0:0: [sdb] Preferred minimum I/O size 512 bytes
  92. [    1.586352]  sdb: sdb1 sdb2
  93. [    1.586492] sd 9:0:0:0: [sdb] Attached SCSI disk
  94. [    1.723505] usb 1-6: New USB device found, idVendor=275d, idProduct=0ba6, bcdDevice= 1.00
  95. [    1.723509] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  96. [    1.723511] usb 1-6: Product: USB OPTICAL MOUSE
  97. [    1.852551] usb 1-11: new high-speed USB device number 4 using xhci_hcd
  98. [    1.898863] ata11: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  99. [    1.899007] ata11.00: ATA-9: V&G SSD, Q0810B, max UDMA/133
  100. [    1.899047] ata11.00: 4000797360 sectors, multi 1: LBA48 NCQ (depth 32), AA
  101. [    1.899488] ata11.00: Features: Dev-Sleep
  102. [    1.900136] ata11.00: configured for UDMA/133
  103. [    1.900231] scsi 10:0:0:0: Direct-Access     ATA      V&G SSD          0B   PQ: 0 ANSI: 5
  104. [    1.900514] sd 10:0:0:0: Attached scsi generic sg2 type 0
  105. [    1.900616] sd 10:0:0:0: [sdc] 4000797360 512-byte logical blocks: (2.05 TB/1.86 TiB)
  106. [    1.900639] sd 10:0:0:0: [sdc] Write Protect is off
  107. [    1.900643] sd 10:0:0:0: [sdc] Mode Sense: 00 3a 00 00
  108. [    1.900669] sd 10:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  109. [    1.900706] sd 10:0:0:0: [sdc] Preferred minimum I/O size 512 bytes
  110. [    1.902199]  sdc: sdc1 sdc2
  111. [    1.902319] sd 10:0:0:0: [sdc] Attached SCSI disk
  112. [    2.001801] usb 1-11: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=60.90
  113. [    2.001806] usb 1-11: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  114. [    2.001809] usb 1-11: Product: USB2.0 Hub
  115. [    2.002833] hub 1-11:1.0: USB hub found
  116. [    2.003118] hub 1-11:1.0: 4 ports detected
  117. [    2.132550] usb 1-14: new full-speed USB device number 5 using xhci_hcd
  118. [    2.214907] ata12: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  119. [    2.215073] ata12.00: ATA-9: V&G SSD, Q0810B, max UDMA/133
  120. [    2.215127] ata12.00: 4000797360 sectors, multi 1: LBA48 NCQ (depth 32), AA
  121. [    2.215587] ata12.00: Features: Dev-Sleep
  122. [    2.216257] ata12.00: configured for UDMA/133
  123. [    2.216418] scsi 11:0:0:0: Direct-Access     ATA      V&G SSD          0B   PQ: 0 ANSI: 5
  124. [    2.216781] sd 11:0:0:0: Attached scsi generic sg3 type 0
  125. [    2.216922] sd 11:0:0:0: [sdd] 4000797360 512-byte logical blocks: (2.05 TB/1.86 TiB)
  126. [    2.216942] sd 11:0:0:0: [sdd] Write Protect is off
  127. [    2.216946] sd 11:0:0:0: [sdd] Mode Sense: 00 3a 00 00
  128. [    2.216975] sd 11:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  129. [    2.217017] sd 11:0:0:0: [sdd] Preferred minimum I/O size 512 bytes
  130. [    2.218532]  sdd: sdd1 sdd2
  131. [    2.218655] sd 11:0:0:0: [sdd] Attached SCSI disk
  132. [    2.268601] r8169 0000:06:00.0 enp6s0: renamed from eth0
  133. [    2.286006] usb 1-14: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
  134. [    2.286015] usb 1-14: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  135. [    2.294545] hid: raw HID events driver (C) Jiri Kosina
  136. [    2.298637] usbcore: registered new interface driver usbhid
  137. [    2.298640] usbhid: USB HID core driver
  138. [    2.301090] input: USB OPTICAL MOUSE  as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/0003:275D:0BA6.0001/input/input6
  139. [    2.301210] hid-generic 0003:275D:0BA6.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:14.0-6/input0
  140. [    2.390952] fbcon: Taking over console
  141. [    2.391063] Console: switching to colour frame buffer device 128x48
  142. [    2.399223] EXT4-fs (nvme2n1p4): mounted filesystem c0151370-0ffb-41fa-92da-8ada3c51687b ro with ordered data mode. Quota mode: none.
  143. [    2.469769] systemd[1]: Inserted module 'autofs4'
  144. [    2.497749] systemd[1]: systemd 249.11-0ubuntu3.12 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY -P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
  145. [    2.497875] systemd[1]: Detected architecture x86-64.
  146. [    2.498127] systemd[1]: Hostname set to <newbie-Z690GTA>.
复制代码
9283684 发表于 2024-6-2 19:48
本帖最后由 9283684 于 2024-6-2 19:51 编辑

你这是已经驱动了，用的 ahci 驱动。用 ls -l /dev/disk/by-id (这个会显示硬盘序列号) 或者 ls -l /dev/disk/by-path 看看有没有列出所有的盘。如果没有，看看 dmesg 有没有什么错误信息。
9283684 发表于 2024-6-2 11:49
驱动有没有加载，用 lspci -vvv 看。
Screenshot 2024-06-02 at 11.47.34.png

Archiver|手机版|小黑屋|Chiphell ( 沪ICP备12027953号-5 )沪公网备310112100042806 上海市互联网违法与不良信息举报中心

GMT+8, 2025-5-21 11:36 , Processed in 0.012558 second(s), 9 queries , Gzip On, Redis On.

Powered by Discuz! X3.5 Licensed

© 2007-2024 Chiphell.com All rights reserved.

快速回复 返回顶部 返回列表